Low Force Electromechanical Testing Machine رایمند سیستم آزما <



Low Force Electromechanical Testing Machine - CMT 2000 Series

This series of testing machines are extensively used in research laboratories and on production lines, in quality control and in education. They are suitable for performing tensile, compression, bending, shearing, peeling and tearing tests of specimen, including raw material, semi-product and finished-product in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, petrochemistry, etc.
    • Easy to use and operate
    •High accuracy
    Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass ±0.5% of reading
    •High sampling rate
    The sampling rate 50Hz, reach advanced international level
    •High load resolution
    Better than 1/200000, no step, and unchanged in full range
    • Multi-cycle control modes
    Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination.
    •High security
    The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
    •Comply with different standards, such as ASTM, BS, JIS, ISO, IEC…



CMT 6000 Series

This series of testing machines are extensively used in research laboratories and on production lines, in quality control and in education. They are suitable for performing tensile, compression, bending, shearing, peeling and tearing tests of specimen, including raw material, semi-product and finished-product in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, petrochemistry, etc.
    • Easy to use and operate
    •High accuracy
    Measurement accuracy of testing speed, load, crosshead displacement can meet or surpass ±0.5% of reading
    •High sampling rate
    The sampling rate 50Hz, reach advanced international level
    •High load resolution
    Better than 1/200000, no step, and unchanged in full range
    • Multi-cycle control modes
    Control system is capable in load cycle, displacement cycle, extensometer cycle or their combination.
    •High security
    The system can inspect and protect automatically once overload, over currency; Position limiter; Emergency stop
    •Comply with different standards, such as ASTM, BS, JIS, ISO, IEC…



CMT8000 Series Desktop Electromechanical Universal Testing Machines

SANS's line of desktop Electromechanical Materials Testing Machines are designed to test a wide spectrum of materials including aluminum foil, enameled wire, copper foil, plastic packing material, precise spring and concerned materials .CMT8000 series UTM’s maximum frame capacities are from 5N to 500N.

Specifications:
    • Model: CMT8000 series (minitype)
    • Specification: CMT8500,CMT8101,CMT8201,CMT8202,CMT8502
    • Capacity: 5N,10N,20N,200N,500N
    • Accuracy level: grade 0.5/1
    • Effective measurement range: 0.4%-100%/FS/0.2%-100%/FS
    • Load resolution: 1/300000 of capacity
    • Deformation measurement accuracy: within ±0.5% of read value
    • Effective vertical tensile space: 300mm/500mm
    • Space between columns: 300mm
    • Range of loading speed: 0.001--500mm/min
    • Protective function: automatic protection reacts when loading is over 10% of maximum capacity
    • Load frame dimension: 620×460×1530mm

Shenzhen SANS Testing Machine Co. , LTD

Add : No.100 Chaguang Village, Shahe West Road, Nanshan, Shenzhen , China
Postcode 518055    
Tel + 86-755-26622873
          + 86-755-26700866
          + 86-013510811492
Fax + 86-755-26700052
E-mailinfo@sans.com.cn



خواهشمند است در صورت نياز به اطلاعات بيشتر در خصوص دستگاههاي معرفي شده ويا صدور پيش فاكتور ريالي و پروفرماي ارزي بااين شركت به شماره تلفن 88881191 وفكس 88664727 وياموبايل 09123600263 تماس حاصل فرمائيد.
رایمند سیستم آزما